1. Do not touch the blades and the power cord around the fan or pull the power cord, the shaft and power cord will be damaged;

2. Please avoid the entry of dust, water droplets and small insects, which will affect the life span and produce defective products;

3. Do not use in flammable gas and any harmful environment;

4. Please use it within six months, long-term storage will affect the fan performance due to the storage environment;

5. When the fan is in operation, please do not attempt to lock the fan for a particularly long time. This will cause the fan to be burnt due to continuous stoppage and high heat generation;

  6. When installing the fan, please pay special attention to the noise caused by resonance or vibration;

7. When the fan is dropped from a height of 60cm during transportation or operation, it will have some influence on the balance of the blades, especially the ball bearings to avoid falling;

8. The screw torque of the lock shell shall not exceed 4Kgf; please do not use screwdrivers, iron rods, etc. to block the fan, as this will damage the fan;

9. Please note that the fan will hurt your fingers when running at high speed.